Removing The Front Panel - SOLTRON XXS Serie Instructions De Service

Cleaning and maintenance
24/46
The assembly is the same process in reverse order.
When assembling the device please note:
– Use the scratch protection.
– Carefully lay the canopy panel in the guide.
4.8.3

Removing the front panel

– Remove the acrylic glass panel: see page 22.
– If necessary, remove the screws from the inside.
– Carefully lift the upper edge of the front panel out of the holder (pull
upwards).
– Lift the front panel in order to lift it out of the two lower hooks.
– Then remove the front panel to the front and lay it aside.
The assembly is the same process in reverse order.
DANGER!
Danger of crushing fingers when inserting the front
panel!
Fingers can be jammed when pressing in the front panel.
– Do not hold fingers between the front panel and the
device when pressing.