Staff Training; Guidelines; Installation Location; Ventilation - SOLTRON XXS Serie Instructions De Service

Information for the studio operator
8/46
2.4

Staff training

As the operator you are obligated to train your personnel and instruct them in
the established legal and accident prevention regulations. Ensure that your
staff have understood and observe these instructions. This includes:
information regarding intended use and foreseeable misuse

safety instructions in Part II of the Operating Instructions

operating instructions

cleaning and maintenance instructions

– Please make the instructions and additional information from the manu-
facturer available to the staff at their workplace.
– Regularly check your staff's safety consciousness and awareness of the
risks, taking into account your operating instructions.
– Please ensure that the cleaning intervals are complied with, in particular
cleaning after every use.
– Please ensure that your staff provide your customers with appropriate
advice, in particular regarding tanning times, possible risks and the oper-
ation of the device.
2.5

Guidelines

This product is in conformity with the performance standards for sunlamp
products under 21 CFR 1040.20, FDA and listed with ETL and
CAN/CSA 22.2 2 No. 224.
2.6

Installation location

2.6.1

Ventilation

CAUTION!
Danger of failure!
Danger of overheating by obstruction of the air routing.
– Observe the ventilation information in the Ergoline
Planning Manual to avoid serious system malfunctions.
You can obtain data regarding the air supply and ventilation from the
customer service department (see page 2).
2.7

Export

This device is exclusively intended for use in the USA and Canada and may
not be exported to other countries and operated there! The manufacturer
assumes no liability whatsoever in the event of non-compliance. High liability
risks may occur for the exporter and/or the operator in the event of noncom-
pliance.