Interrupt Or End Tanning Session - SOLTRON XXS Serie Instructions De Service

Operation
14/46
Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the START/STOP button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective gog-
gles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
– Press the START/STOP button.
Settings on start-up:
UV lamps

Facial tanner (depending on model)

Cooling

Stereo Sound System PLUS (optional)

Air condition (optional)

3.5.2

Interrupt or end tanning session

The tanning session ends automatically after the preset time has run down.
The internal fan continues to run for approx. three (3) minutes to sufficiently
cool the device.
– To interrupt a tanning session, press button START/STOP anytime dur-
ing a session.
– Press START/STOP again to restart the lamps.