To Interrupt Tanning Session; Settings During Start-Up - SOLTRON XS Instructions D'utilisation

The tanning unit is operating when the UV lamps are on and the fans are
running.
If the device fails to start up when you have closed the canopy:
– Press button to start tanning.
Interrupt or end tanning session
The tanning session ends automatically after the preset time has run
down. The internal fan continues to run for approx. three (3) minutes (fan
delay, minimum one (1) minute, see page 48) to sufficiently cool the de-
vice.
– To interrupt a tanning session, press button
session. This will stop the countdown and hold time (depending on
presets, see page 52).
– To restart the unit, press button
– To end a tanning session, press button
The timer clears to read 00:00.
Settings during start-up: XS-35
anytime during a
again.
and then button .
1)
1) See also Presets, page 46 ff
23