SOLTRON XS Instructions D'utilisation page 50

Presets
P07 – Measurement of the A/C Voltage on Phase A
Parameter 07 is the measurement of the A/C voltage on phase A.
The reading is immediately displayed, the display will read from 0000 to
0200 Volts, with 0120 as the nominal reading.
– Press to go to Parameter 08 (P08).
P08 – Measurement of the A/C Voltage on Phase B
Parameter 08 is the measurement of the A/C voltage on phase B.
The reading is immediately displayed, the display will read from 0000 to
0200 Volts, with 0120 as the nominal reading
– Press to go to Parameter 09 (P09).
P09 – Measurement of the Average A/C Voltage on Phase A
Parameter 09 is the measurement of the average A/C voltage on phase
A for the previous session, or current session if unit is energized.
The reading is immediately displayed.
– Press to go to Parameter 10 (P10).
P10 – Measurement of the Average A/C Voltage on Phase B
Parameter 10 is the measurement of the average A/C voltage on phase
B for the previous session, or current session if unit is energized.
The reading is immediately displayed.
– Press to go to Parameter 11 (P11).
50
P11 – Measurement of the Internal Operating Temperature
Parameter 11 is the measurement of the unit's internal operating tempe-
rature.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 12 (P12).
P12 – Measurement of the Ambient or Room Temperature
Parameter 12 is the measurement of the unit's ambient or room tempe-
rature.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 13 (P13).
P13 – Measurement of the Average Operating Temperature
Parameter 13 is the measurement of the unit's average operating tempe-
rature during the previous session or current session if the unit is energi-
zed.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 14 (P14).
P14 – Measurement of the Average Ambient or Room Tem-
perature
Parameter 14 is the measurement of the unit's average ambient or room
temperature during the previous session or current session if the unit is
energized.