Product Information; Maintenance And Care - SOLTRON XS Instructions D'utilisation

Please read and observe ...

Product information

Acrylic glass panels
The acrylic glass panels for the tanning devices are produced of acrylic
glass developed especially for this application. The acrylics used are
characterized by a particularly high UV permeability and resistance, as
well as an easy-care, hygienic surface that is gentle to the skin.
The acrylic glass panels are formed to their shapes for the specific devic-
es in a technically complex production process. Despite state-of-the-art
production know-how, the presence of minor spots, air bubbles or
streaks in the acrylic panels is unavoidable. In addition, microfine hairline
cracks can occur on the bed surface during operation.
These occurrences are material-dependent and are unavoidable in pro-
cessing, however have no significant effect on the utility value and can
therefore not be recognized as defects.
CAUTION!
Cosmetics or sun screen products must be removed prior to
tanning as they can cause damage (e.g. cracks on the sur-
face) when used continuously.
16

Maintenance and care

Extreme danger! High voltage!
During maintenance work there is a risk of touching live
parts and receiving a fatal electric shock.
DANGER!
– Disconnect device from power supply before opening –
also see Page 29.
– Do not reach behind covers and do not open the device
with the device switched on.
– Refit any safety devices (e.g. switches) after the work
has been completed.
Maintenance and care play a major role in deciding whether the device
meets the requirements placed on it in a satisfactory manner. The com-
pliance with the specified maintenance intervals and the careful conduct-
ing of the maintenance and care work are therefore absolutely necessary
– see Page 30.
CAUTION!
Only use genuine spare parts of the same type!
The use of other parts voids the conformity!
Any liability is excluded in case of damage or injury proven
to be the result of the use of non-genuine spare parts.