Additional Maintenance - SOLTRON XXS Serie Instructions De Service

Component
1 Springs
Springs
2 Bolts and fasteners of the canopy hinge
mechanism
Bolts and fasteners of the canopy lift mecha-
nism
Bolts and fasteners of the canopy hinge/lift
mechanism
3 Bolts and fasteners of the base/tank hinge/lift
mechanism
Bolts and fasteners of the base/tank hinge/lift
mechanism
4 Cylinders
Cylinders
5 Chassis and associated fasteners
Chassis and associated fasteners
6 Wiring and associated plugs / terminal
connections
7 Acrylic panels
2)
Acrylic panels
2)
8 Acrylic support(s)
Acrylic support(s)
9 High pressure filter glass
High pressure filter glass
10 High pressure lamp holder
High pressure lamp holder
03/2014 1006322-01
4.7

Additional maintenance

In addition to the maintenance plan in Operating Instructions Part II, the fol-
lowing items should be checked to ensure safe operation and use of your
tanning system.
Interval
1)
X
X
X
X
X
X
X
X
X
X
1) Interval must be repeated after each inspection or replacement (i.e. 1
months, 3 : 9 months, etc.)
rd
2) The schedule for acrylic replacement listed refers only to the condition of the acrylic relat-
ing to safety and does not address the efficacy of UV
Cleaning and maintenance
Activity
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
Inspect and replace as
necessary
X Replace
X Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
X Replace
Inspect and replace as
necessary
X Replace
Operating instructions – 21/46
st : 3 months, 2 nd : 6