03/2014
1006322-01
32/1:
–
Remove the lamp covers above and below the facial tanner.
Replacing lamps:
UV low pressure lamps: see page 25.
UV high pressure lamps and filter panels: see page 27.
Replace the starter: see page 26.
The assembly is the same process in reverse order.
When assembling the device please note:
–
When replacing the lamp covers ensure that the clips are in contact with
the magnets.
–
Use the scratch protection.
–
Carefully lay the canopy panel in the guide.
4.12
Cleaning or replacing interior lighting
–
Remove the canopy panel: see page 23.
–
Remove the lamp cover at the foot end.
Cleaning and maintenance
Operating instructions – 31/46