Procedure For Tilting Down - Yamaha F115 Manuel De L'utilisateur

NOTICE: Do not use the
sure.
[EWM00263]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be
trailered in the normal running posi-
tion, use an additional support device
to secure it in the tilt position. For
more detailed information, see page
79.
[ECM01642]
1. Tilt support lever
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
1
1. Tilt support lever
3.
1
1. Power trim and tilt switch
ZMU08097
"
1. Power trim and tilt switch
DN
1. Power trim and tilt switch
ZMU08099
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
1
DN
1
Operation
"
ZMU07851
ZMU07853
1
ZMU08098
76