Procedure For Tilting Down; Shallow Water; Cruising In Shallow Water - Yamaha VF90 Manuel De L'utilisateur

suddenly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
NOTICE: Do not use the
sure.
[EWM00263]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be
trailered in the normal running posi-
tion, use an additional support device
to secure it in the tilt position. For
more detailed information, see page
62.
[ECM01642]
1. Tilt support lever
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
1
1. Tilt support lever
3.
1
1. Power trim and tilt switch
DN
ZMU08097
1. Power trim and tilt switch
"
EMU28063
EMU40702

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02361
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
ZMU08099
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
1

Shallow water

Operation
"
ZMU06987
1
ZMU08694
59