Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha F75 Manuel De L'utilisateur

Operation
UP
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
NOTICE: Do not use the
sure.
[EWM00263]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be
trailered in the normal running posi-
tion, use an additional support device
to secure it in the tilt position. For
more detailed information, see page
71.
[ECM01642]
68
EMU35517
Procedure for tilting down (power trim
and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
ZMU04232
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
"
"
ZMU01936