Procedure For Tilting Down; Shallow Water; Power Trim And Tilt Models - Yamaha F200 Manuel De L'utilisateur

Operation
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
68
"
DN
EMU28063
EMU32872

Power trim and tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM01491
ZMU07546
NOTICE
"
 If the engine speed is suddenly in-
creased when the outboard motor is
partially tilted up, the power trim and tilt
unit could be damaged.
 Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit
is above the surface of the water when
setting up for and cruising in shallow
water. Otherwise severe damage from
overheating can result.
EMU32923
Procedure for power trim and tilt models
ZMU08492
1. Place the remote control lever in neutral.
ZMU04603

Shallow water

N
ZMU04909
ZMU04588