6Y8 Multifunction Meters - Yamaha F200 Manuel De L'utilisateur

Instruments and indicators
1
1. Low oil pressure-alert indicator
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert device
is activated. Check the engine oil quantity
and replenish oil if necessary. If the alert de-
vice has activated while the appropriate en-
gine oil quantity is maintained, consult your
Yamaha dealer.
ECM01602
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
Overheat alert
If the engine temperature rises too high while
cruising, the pop -up window will appear.
The engine speed will automatically decrease
to about 2000 r/min.
1
1. Pop-up window
44
To return to the normal display
Push the "SET" (set) button, and the over-
heat-alert indicator will start to blink.
1
ZMU08335
1. Overheat-alert indicator
Stop the engine immediately if the buzzer
sounds and the overheat device has activat-
ed. Check the cooling water inlet for clog-
ging.
ECM01594
NOTICE
 Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
 Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU46650

6Y8 Multifunction meters

There are two types of 6Y8 Multifunction me-
ters.
 6Y8 Multifunction tachometer
 6Y8 Multifunction speed & fuel meter
ZMU08331
ZMU08336