Procedure For Tilting Down; Shallow Water; Cruising In Shallow Water - Yamaha F200 Manuel De L'utilisateur

Operation
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
1
1. Tilt support lever
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
71
ZMU07770
ZMU05840
DN
ZMU07999
"
DN
1. Power trim and tilt switch
EMU28063

Shallow water

EMU40702

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02361
NOTICE
"
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
1. Cooling water inlet
EMU35237
Procedure for power trim and tilt models
1. Place the control lever in neutral.
1
ZMU07771
1
ZMU07772