Trimming Outboard Motor - Yamaha F75 Manuel De L'utilisateur

Operation
OFF
2. After stopping the engine, disconnect
the fuel hose from the fuel joint on the
fuel tank.
64
ON
ZMU01779
2
1. Fuel joint
2. Fuel hose
3. Tighten the air vent screw by turning it
clockwise.
1. Air vent screw
4. Remove the key if the boat will be left un-
attended.
TIP:
The engine can also be stopped by pulling
the cord and removing the clip from the en-
gine shut-off switch, then turning the main
switch to " " (off).
EMU27865

Trimming outboard motor

EWM00741
WARNING
Excessive trim for the operating condi-
tions (either trim up or trim down) can
cause boat instability and can make steer-
ing the boat more difficult. This increases
1
ZMU07443
1
ZMU07444