Muddy Or Acidic Water; Anti-Fouling Paint; Outboard Motor Disposal Requirements; Emergency Equipment - Yamaha F115 Manuel De L'utilisateur

fectiveness. Consult your Yamaha dealer
concerning what may work best for the local-
ly available gasoline and environmental con-
ditions.
EMU36881

Muddy or acidic water

Yamaha strongly recommends that you have
your dealer install the optional chromium-
plated water pump kit if you use the outboard
motor in muddy or acidic water conditions.
However, depending on the model it might
not be required.
EMU41352

Anti-fouling paint

A clean hull is required to maintain your
boat's performance. Boats moored in the wa-
ter should be protected from marine growth
(barnacles, mussels, and marine plants). If
approved by regulations for your area, the
bottom of the hull can be coated with an anti-
fouling paint to inhibit marine growth.
Anti-fouling paints specifically formulated for
use on aluminum may be applied to the out-
board motor. The original Yamaha paint sur-
face may be scuffed lightly before applying
anti-fouling paint, but do not remove the orig-
inal paint. Removal of the original paint will in-
crease the rate of corrosion.
ECM02411
NOTICE
Anti-fouling paint for fiberglass and wood
may contain materials, such as copper,
graphite, and tin, that can cause corrosion
if applied to aluminum boats and outboard
motor components. Never apply these
types of paint to your outboard motor be-
cause rapid corrosion damage could oc-
cur.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
Specifications and requirements
Sacrificial anodes made from a different ma-
terial may be necessary for maximum corro-
sion protection due to your local water
conditions. Please consult your Yamaha
dealer.
ECM02421
NOTICE
Painted sacrificial anodes will not provide
corrosion protection.
EMU40302
Outboard motor disposal re-
Never illegally discard (dump) the outboard
motor. Yamaha recommends consulting the
dealer about discarding the outboard motor.
EMU36353
Keep the following items onboard in case
there is trouble with the outboard motor.
 A tool kit with assorted screwdrivers, pliers,
wrenches (including metric sizes), and
electrical tape.
 Waterproof flashlight with extra batteries.
 An extra engine shut-off cord (lanyard) with
clip.
 Spare parts, such as an extra set of spark
plugs.
Consult your Yamaha dealer for details.
EMU25223

Emission control information

EMU25232
This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31563
Approval label of emission control certifi-
cate
This label is attached at the location shown.
New Technology; (4-stroke) MFI
quirements

Emergency equipment

22