Tektronix 6 Serie Manuel D'installation Et De Sécurité page 27

3. Select Instrument Control (e*Scope
4. Use a mouse to select and interact with the instrument controls shown in the Web browser. If your remote PC or laptop has
a touch screen monitor, you can use the remote touchscreen monitor to access the instrument controls.
NOTE. When you access the instrument from an e*Scope browser, you cannot directly paste text (such as path, IP address
information, and so on) from the PC to an instrument menu field. You must use an intermediate clipboard function that is
available in the e*Scope application.
Use the following steps to copy text from an e*Scope-connected PC to the instrument:
a. Open a connection to the instrument using e*Scope.
b. Select and copy the text on your PC.
c. In e*Scope, press Ctrl-Alt-Shift to open the Clipboard menu.
d. Paste the text into the Clipboard field.
e. Press Ctrl-Alt-Shift to close the browser Clipboard menu.
f.
Use e*Scope to open the instrument menu to which to paste content, and position the cursor in the field where you
want to paste the text.
g. Press Ctrl-V (on real keyboard or from virtual keyboard) to paste the text from the e*Scope browser clipboard to the
menu field.
h.
Repeat steps 4.b through 4.g to copy and paste other text from the PC to the instrument.
LPD64 Installation and Safety Manual
®
). The browser displays the instrument screen.
Configure the instrument
15