Remote Access From A Web Browser (Standard Instrument) - Tektronix 6 Serie Manuel D'installation Et De Sécurité

Configure the instrument
3. Obtain or enter the network address information:
■ If your network is DHCP-enabled, and the IP address field does not already show and address, tap Auto to obtain the
IP address information from the network. DHCP mode is the default mode.
■ If your network is not DHCP-enabled, or you need a permanent (non-changing) IP address for this instrument, tap
Manual and enter the IP address and other values provided by your IT or system administrator resource.
4. Tap Test Connection to verify that the network connection is working. The LAN Status icon turns green when the
instrument successfully connects to your network. If you have problems connecting to your network, contact your system
administration resource for help.
The front panel LAN status LED colors display the network connection status:
■ Off - No power to the instrument
■ Green - Network connection is good
■ Red - Network connection has a fault or is not connected

Remote access from a Web browser (standard instrument)

You can remotely access your network-connected standard instrument (not running Windows) from a Web browser to display the
instrument user interface on a PC.
This procedure describes how to remotely access the UI controls and screen for standard (non Windows 10) instruments. To
remotely access the UI controls and screen for Windows 10 instruments, see the Remote access to a Windows 10 instrument
topic in the Help.
Prerequisites:
The instrument must be connected to, and accessible from, the network to which the PC is connected. See
■
network (LAN) on page 13
The IP address of the instrument that you want to access. To determine the instrument's IP address, select Utility > IO in
■
the instrument menu bar and view the network settings in the LAN panel.
You are accessing a standard (instrument that does not have the Windows OS option installed).
■
1. Open a Web browser on a PC connected to the same network as the instrument.
2. Enter just the instrument IP address on the URL line of the browser and press Enter. For example: 135.62.88.157. The
browser searches for and opens the Web page for the instrument.
14
Connect to a
LPD64 Installation and Safety Manual