The Graphical User Interface - Tektronix 6 Serie Manuel D'installation Et De Sécurité

Getting acquainted with your instrument
6. Grasp the edges of the raised end and pull to remove the board.
7. Store or destroy the memory card in accordance with your organization's guidelines.
8. To install an m.2 board, follow these steps in reverse order.
9. Reattach the board cover.

The graphical user interface

Although designed for programmatic control, the LPD64 also has a graphical user interface that incorporates product Help topics.
You can access the graphical interface by connecting a monitor and mouse to the instrument, or by using a browser to access a
network-connected instrument.
Connect a monitor (standard or touchscreen) with a maximum resolution of 1,920 horizontal × 1,080 vertical pixels (High
Definition) to a video out connector on the rear panel.
To access from a browser, type the IP address of the instrument in the browser address field to open the instrument's browser
welcome page. Click the Instrument Control (e*Scope
Connect a mouse (USB cable) or mouse dongle (for USB wireless mouse) to any USB port.
Refer to the 6 Series MSO Installation and Safety Manual (Tektronix part number 071-3579-xx), available to download from
www.tek.com/product-support, for details on understanding and using the graphical user interface.
You can also get information by opening the instrument Help system. Select Help > Help in the Menu bar and open the Getting
acquainted with your instrument topic.
10
®
) link on the left of the screen to open the graphical interface.
LPD64 Installation and Safety Manual