Installing Your Instrument; Check Shipped Accessories; Operating Requirements - Tektronix 6 Serie Manuel D'installation Et De Sécurité

Installing your instrument

Check shipped accessories

Make sure that you received everything you ordered. If anything is missing, contact Tektronix Customer Support. In North
America, call 1-800-833-9200. Worldwide, visit www.tek.com to find contacts in your area.
Check the packing list that came with your instrument to verify that you have received all standard accessories and ordered
items. If you purchased factory installed options such as a Serial Bus and Triggering option, or the Power measurements option,
tap Help > About to confirm that the option(s) are listed in the Installed Options table.
LPD64 standard accessories
Item
6 Series Low Profile Digitizer LPD64 Installation and Safety Manual
Power cord
Calibration certificate
Report of factory installed licenses

Operating requirements

Use the instrument within the required operating temperature, power, altitude, and signal input voltage ranges to provide the
most accurate measurements and safe instrument operation.
Environment requirements
Characteristic
Operating temperature
Operating humidity
Operating altitude
LPD64 Installation and Safety Manual
Description
0 °C to +50 °C (+32 °F to +122 °F)
For proper cooling, keep the sides of the instrument clear of obstructions for 2 inches
(51 mm).
5% to 90% relative humidity (% RH) up to +40 °C (+104 °F), Noncondensing.
5% to 50% RH above +40 °C up to +50 °C (+104 °F to +122 °F), Noncondensing.
Up to 3000 meters (9842 feet)
Quantity Tektronix part number
1 071-3569-xx
1 Depends on region
1 N/A
1 N/A
1