CEMO DT-Mobil Easy 125 l Manuel D'utilisation page 26

GB
11. Conformity Declaration DT-Mobil Easy with ADR approval
EC Conformity Declaration to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Make:
Type designation:
Serial numbers:
Description:
Mobile diesel filling station (IBC) with single-wall PE tank (as per ADR approval)
of various capacities (200 l, 460 l, 600 l)
complies with all relevant specifications from the above named directive,
including its amendments applicable at the time of the declaration.
The machine also complies with the protection targets of low voltage directive 2006/95/EC.
The following harmonised standards were applied:
EN 349:1993+A1:2008
EN 60204-1:2006/A1:2009
EN 60204-1:2006
EN 809:1998+A1:2009
EN ISO 12100:2010
EN ISO 13857:2008
Name and address of legal entity authorised to assemble the technical documentation:
see above (= manufacturer)
Location:
Date:
_______________________________________
(Signature)
Eberhard Manz, Managing Director CEMO GmbH
26
Mobile diesel filling station
CEMO
DT-Mobil Easy
10081-10083, 10085-10088, 10112, 10291, 10320, 10414, 10416 - 10419, 10459,
10460, 10735, 10465, 10493, 10494, 11083, 11085
Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:205/A1:2008)
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:200 (modified)
Pumps and pump units for liquids - Common safety requirements
Safety of machinery – General principles of design –
Risk assessment and risk reduction
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs (ISO 13857:2008)
Weinstadt
04.12.2018