General; Safety Information; Maintenance And Monitoring; Using Original Parts - CEMO DT-Mobil Easy 125 l Manuel D'utilisation

GB

1. General

The mobile diesel filling station is state of the art
technology and complies with approved technical
safety regulations.
The filling station carries the CE symbol, i.e. the
EU directives and harmonised standards of rel-
evance to the filling station were applied during
design and manufacture.
The filling station may only be used in a technically
flawless condition in the version delivered by the
manufacturer.
For safety reasons, modifications are not allowed
to the filling station (except for the addition of
accessories specially provided by the manufac-
turer).

1.1 Safety information

Each filling station is tested for function and safety
before despatch.
The filling station is safe to operate when used
correctly.
Incorrect operation or misuse poses a dangerous
risk to:
• the life and limb of the operator
• the filling station and other assets of the operator
• the function of the installation.
In order to avoid risks to people, animals and
property, please read these operating instructions
prior to using the filling station for the first time, in
particular all safety notices.
Make sure that:
• you understand all the safety notices
• the operator of the filling station is informed
about the notices and understands them
• the operating instructions are to hand and placed
near the filling station.

1.1.1 Maintenance and monitoring

The filling station must be regularly checked to
ensure it is in a safe condition.
In particular, this check includes:
• a visual inspection for leaks (seal of filling hose
and fittings)
• a function test
• completeness/identifiability of the warning, man-
datory and prohibitory signs on the installation
• the prescribed regular inspections
(for details see section 7).
16

1.1.2 Using original parts

Please only use original parts provided or recom-
mended by the manufacturer. Also take note of all
safety and usage information provided with these
parts. This applies to:
• spare and wearing parts
• parts for accessories

1.1.3 Operating the filling station

In order to avoid any hazards due to incorrect
operation, the filling station may only be operated
by individuals who
• have read the operating instructions
• have proven their ability to operate the equipment
• have been assigned to operate the equipment.
i

Important!

The operating instructions must be easily
accessible for each user.

1.1.4 Warning notices on the filling station

The warning signs on the installation must always
be affixed and legible.
Signs affixed by the manufacturer:
Ban on fire, naked flames
and smoking
Application:
to the front side of the tank
Warning against hand injuries
Application:
on the underside of the lid (can be
seen when the lid (optional) is open)