Loading; By Hand; With Forklift; With Crane - CEMO DT-Mobil Easy 125 l Manuel D'utilisation

5.2 Loading...

5.2.1 ...by hand

An empty DT-Mobil
Easy can be loaded
by hand using the
grip hollows on the
side of the tank. When
doing so, observe the
weights of the empty
equipment:
• 125 l = 24-27 kg
• 200 l = 25-28 kg
• 430 l = 45-58 kg
• 460 l = 47-60 kg
• 600 l = 53-66 kg

5.2.2 ... with forklift

i
Important!
Use the moulded recesses on the
underside for safe lifting with a forklift.

5.2.3 ... with crane

Danger!
A DT-Mobil Easy can cause severe
injuries if it falls.
Before each crane operation, the
screw fastenings of the 4 brackets
must be checked for a correct and secure
connection.
Do not stand under suspended loads during
crane operations.
• fold up the 4 brackets i fixed to the side
of the tank.
• attach 4 load handling devices to them.
• load/unload the DT-Mobil Easy onto/from the
transport vehicle.
i
Important!
- Each load handling device
(rope, belt, chain) must be of the
same length (minimum length: 1 m).
- For the version with lid, this must be closed
and completely locked with the two locks j.
Fig. 5.2.1: Grip hollow
Fig. 5.2.2: Forklift
10
9
Fig. 5.1a: Lid lock

5.3 Transporting

During transport, observe the pertinent regulations
for transport and securing loads, in particular:
• road-traffic (licensing) regulations of the
respective country,
• CEN 12195 Parts 1 to 4 for calculation and lashing
For fastening on the transport vehicle by means
of suitable tension belts, use
• the 4 crane loops i on the 460 l tank and
600 l tank for placing the tensioning belts
9
Fig. 5.3.1: Crane loops
(folded down)
• for all other versions, the integrated recesses l
on the tank for positioning the tensioning belts.
12
Fig. 5.3.2: Belt recesses on 200 l tank
GB
9
Fig. 5.2.3: Crane loops
(folded up)
12
21