Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/8/2020 7:48:40 AM
MANUFACTURING INFORMATION
Product Covered
The models of 2.5 Series Wood Fuel Room Heater are constructed of sheet steel. The outer dimensions are 21
3/4-inches deep, 34 1/4-inches high, and 36-inches wide. The unit has a door located on the front with a viewing
glass.
Proprietary drawings and manufacturing methods are on file at Intertek in 1829 32nd Avenue Montreal
(Lachine), QC Canada H8T 3J1 and in the EPA filing system. Drawings can also be found in this specification
and in EPF' system.
The unit tested was the FP10 Lafayette II model. It is considered a representative unit of the 2.5 Series.
Units outer dimensions are: 21 7/8 " Deep, 37 3/16" High, 34 5/16" Wide.
Firebox size are 16 ± 1/4" Deep, 11 7/8" ± 1/4" High and 18 1/4 ± 1/4" Wide.
Units are zero clearance.
Stove Builder International Inc. | 46345 | Rev: Apr 13 2020 12:33PM | Uncontrolled Copy
Page 7 of 971
Publicité
Chapitres
Table des Matières
