HearthStone WFP-75 8411 Manuel D'installation Et D'utilisation page 46

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/8/2020 7:48:41 AM
MANUAL INSTALLATION AND OPERATION WFP-75 8411 ENGLISH
OF 40)
3.
Using a power screwdriver and hex tip
5/16», remove the slab holder (D) and the left
refractory slab (E).
D
E
5. Align the notch in the left end of the tube with
the key of the left air channel hole. Using a
«Wise grip» hold the tube and lock it in place
by turning the tube as shown. Make sure
the notch reaches the end of the key way.
Note that secondary air tubes can be replaced without removing the baffle board
Page 36
Stove Builder International Inc. | 46345 | Rev: Apr 13 2020 12:33PM | Uncontrolled Copy
4.
5/16"
6. Repeat for center back tube.
7. Put the baffle in place.
8. Repeat steps 1 and 2 for the two front tubes.
9. To remove the tubes use the above steps in
Starting with the rear tube, lean and insert
the right end of the secondary air tube into
the rear right channel hole.
insert the left end of the tube into the rear
left channel.
reverse order.
B
A
Then lift and
WFP-75 8411
Page 725 of 971
(36

Publicité

Chapitres

Table des Matières
loading

Table des Matières