Specifications - Hach SL1000 Manuel D'utilisation De Base

Table of contents
Specifications on page 3
General information on page 4
Installation on page 6
User interface and navigation
on page 8
Expanded manual version
For additional information, refer to the expanded version of this manual, which is available on the
manufacturer's website.

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Enclosure rating
Weight
Power requirements (internal)
Power requirements (external)
Operating temperature
Storage temperature
Interface
5-pin input connector
External power supply connection
Chemkey slots
Data memory
Data storage
Temperature correction (for IntelliCal
probes)
Measurement display lock (for IntelliCal
probes)
Protection class
Certifications
Warranty
Startup on page 10
Standard operation
on page 10
Calibration on page 14
Data log on page 15
Details
13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.)
IP64 with caps installed for the meter probe connector ports or with
the probes connected to the instrument
1.2 kg (2.7 lb)
Lithium ion rechargeable battery
100V-240 VAC, 50/60Hz input, 12V at 3A output
5 to 50 °C (41 to 122 °F), maximum 85% relative humidity (non-
condensing)
-20 to 60 °C (-4 to 140 °F), maximum 85% relative humidity (non-
condensing)
Mini USB port
Two M12 connectors for IntelliCal
2.5 mm Jack
4
1000 measured values (result, date, time, site ID, user ID)
Automatic in Press to Read measurement mode. Manual in
Continuous measurement mode
™
Off, automatic and manual (parameter dependent)
™
Press to Read and Continuous measurement mode
III
CE compliant
1 year
Maintenance on page 16
Troubleshooting on page 19
Replacement parts and accessories
on page 21
™
probes
English 3