Install The Battery; Charge The Battery - Hach SL1000 Manuel D'utilisation De Base

Install the battery

Fire and explosion hazard. This equipment contains a high energy lithium battery which can ignite and
cause fire or explosion, even without power. To maintain the safety provided by the instrument
enclosure, the instrument enclosure covers must be installed and secured with the supplied hardware.
Only use the supplied lithium battery. Refer to
Figure 2 Battery installation and removal

Charge the battery

Fire hazard. Use only the external power supply that is specified for this instrument.
1. Connect the external power supply to an AC mains outlet socket.
2. Connect the external power supply to the power access port on the meter. Refer to
overview on page 5.
W A R N I N G
Figure 2 for battery installation or removal.
W A R N I N G
Product
English 7