Table Des Matières; Specifications - Hach HIAC ROC Manuel D'utilisation

Table of contents
Specifications on page 3
General information on page 4
Installation on page 7
User interface and navigation
Operation on page 12

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (L x W x H)
Enclosure
Fitting connections
Power requirements
Storage temperature
Operating temperature
Altitude limit
Overvoltage category
Pollution degree
Protection class
Light source
Particle size/channel
Storage/operating humidity
Fluid compatibility
Fluid viscosity
Reports
Wetted materials
Performance verification
Weight
Serial interface
Communication protocol
Flow rate for ROC-01, ROC-11, ROC-31,
ROC-41, ROC-61, ROC-71, ROC-81,
ROC-91
Flow rate for ROC-21, ROC-51
Data management
Maintenance
Troubleshooting
on page 11 Replacement parts and accessories
Details
8.9 x 10.7 x 8.9 cm (3.5 x 4.2 x 3.5 in.)
IP 66
SAE -4; SAE -8
9 to 33 VDC, 150 mA
-40 to 85 °C (-40 to 185 °F)
-10 to 60 °C (-14 to 140 °F)
2000 m (6562 ft)
I
4
III
Laser diode, Class I
4, 6, 14 and 21 μm (ISO MTD)
97% relative humidity, non-condensing
Hydraulic and lubrication oils, mineral, synthetic (phosphate ester
compatible)
2 to 424 cSt
ISO 4406, NAS 1638 and SAE AS4059 cleanliness codes
Bronze, aluminum (anodized), steel, stainless steel, sapphire, Aflas
Optional validation certificate available (±0.5 ISO code with ISO
MTD at 2.8 mg/L concentration at 100 mL/min)
746 grams (2 lb)
RS232 and RS485, 9600 or 19200 Baud, 8 data bits, no parity,
1 stop bit
MODBUS RTU
50 to 500 mL/min (0.01 to 0.1 gal/min)
3.8 to 38 L/min (1 to 10 gal/min)
on page 15
on page 18
on page 19
1
on page 21
®
English 3