Din Left; Din Right - BelFox Ultra VA Mode D'emploi

18.1. DIN left:

The sliding gate operator is located in the property.
Note: If you look from the inside of the property to the outside and the opera-
tor is on the left side, then this is DIN LEFT. The gate opens to the left.

DIN right:

18.2.
The sliding gate operator is located in the property
Note: If one looks from the inside of the property to the outside and the drive
is on the right side, then this is DIN RIGHT. The gate opens to the right.
The drives are delivered as standard in DIN left or according to your request.
If you still want to change the DIN, please exchange the limit switches on the
motor control board DCM 47-21 AND the motor connections on the side termi-
nal strip (terminal 13 and 14).
1 2 3 4 5 6 7 8
10 11 12 13 14 15 16 17 18 19 20
2 pole dip switch
On the Ultra 800i with control 47-21-i, the DIN can be set via menu. Please re-
fer to the instructions 47-21-i in chapters 9 and 10.
24