BelFox Ultra VA Mode D'emploi page 52

Incorrect installation or use of the drive can cause unintentional door move-
ments. This can cause persons or objects to be trapped and cause damage.
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x To minimize these risks, follow the instructions and instructions in the
manuals accompanying the product.
x Secure the system against being switched on again by unauthorized per-
sons.
x If possible, have the emergency stop command device ready to trigger
an immediate stop in case of unexpected door movement.
x Install the controls at a sufficient height and/or keep them out of reach
of unauthorized persons.
Incorrect fastening materials can lead to a loss of stability or to the drive brea-
king out, thus reducing the safety of the entire system. This can cause personal
injury and damage to property.
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x Use only suitable mounting materials when installing the drive to ensure
secure mounting.
x
Only suitable and approved fastening materials may be used for installa-
tion.
After completion of the installation, the qualified / competent person must
issue an EC Declaration of Conformity for the door system (complete machine
consisting of door and operator) in accordance with the scope of application
and affix the CE mark and a type plate.
WARNING
Unwanted door movements can lead to heavy
Injuries or death!
WARNING
Unsuitable fastening materials
18