Safety Devices; Hazard Levels; Symbols On The Device; Intended Use - Kärcher SC 3 EasyFix Mode D'emploi

Masquer les pouces Voir aussi pour SC 3 EasyFix:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your
own protection.
Never modify or bypass safety devic-
es.
Pressure regulator
In the case of excessively high pres-
sure in the event of a fault, a safety
valve relieves the pressure into the at-
mosphere.
Fuse
The fuse prevents the device from
overheating. If the device overheats,
the fuse disconnects the device from
the power supply.
Before restarting the device, contact
the KÄRCHER Customer Service at
1-800-537-4129.

Hazard levels

DANGER
Indication of an imminent threat of
danger that will lead to severe inju-
ries or even death.
WARNING
Indication of a potentially dangerous
situation that may lead to severe inju-
ries or even death.
CAUTION
Indication of a potentially dangerous
situation that may lead to minor inju-
ries.
ATTENTION
Indication of a potentially dangerous
situation that may lead to damage to
property.
6

Symbols on the device

(according to type of the device)
Risk of burns, surface of de-
vice becomes hot during op-
eration
Risk of scalding from steam
Read the operating instruc-
tions

Intended use

 The device is intended for house-
hold use only and not for commer-
cial purposes.
 The device is intended to be used
with steam and can be used with the
appropriate accessories as de-
scribed in these operating instruc-
tions. You will not need any
detergent. Please adhere to the
safety instructions.
 Please use this device only with ac-
cessories and spare parts approved
by KÄRCHER.
Note
The manufacturer accepts no liability
for possible damage caused by im-
proper use or incorrect operation.
Owner/User Responsibility
The owner and/or user must have an un-
derstanding of the manufacturer's oper-
ating instructions and warnings before
using this appliance.
Warning information should be empha-
sized and understood.
If the operator is not fluent in English,
the manufacturer's instructions and
warnings shall be read to and dis-
cussed with the operator in the opera-
tor's native language by the purchaser/
owner, making sure that the operator
comprehends its contents.Owner and/
or user must study and maintain for fu-
English

Publicité

Table des Matières
loading

Table des Matières