Initial Commissioning - Kärcher SC 3 EasyFix Mode D'emploi

Decalcification cartridge
1
Filling hole for water
2
Carrying handle
3
Holder for accessories
4
Display
5
Indicator light (green) - mains volt-
6
age present
Indicator light (red) - water shortage
7
Indicator light (red) - replace decal-
8
cification cartridge
RESET button - set water hardness
9
Switch - On
10
Switch - Off
11
Park bracket for floor nozzle
12
Mains connection cable with mains
13
plug
Non-driven wheels (2 x)
14
Steering roller
15
Steam gun
16
Steam lever
17
Unlocking button
18
Selector switch for steam volume
19
(child lock)
Steam hose
20
Spotlight nozzle
21
Round brush (small, black)
22
Manual nozzle
23
Microfiber cover for manual nozzle
24
Extension tubes (2 x)
25
Unlocking button
26
Floor nozzle
27
Hook and loop fastener
28
Microfiber floor cloth (1 x)
29

Initial commissioning

ATTENTION
Device damage due to calcification
The decalcification cartridge only
works properly if you adjust the device
to the local water hardness before op-
erating it for the first time.
Set the device to the local water hard-
ness.
Set the device to the current water
hardness before using it in an area with
a different water hardness (e.g. after a
move)
1. Insert the decalcification cartridge
into the opening and push it so that
it is firmly in place.
2. Set the water hardness, see chapter
Setting the water hardness.
English 9