Operation; Filling With Water; Switching The Device On - Kärcher SC 3 EasyFix Mode D'emploi

5. Push the accessory and / or the floor
nozzle onto the free end of the ex-
tension tube.
The accessory is connected.
Disconnecting accessories
1. Set the selector switch for the steam
volume to the rear.
The steam lever is locked.
2. Push the unlocking button and pull
the parts apart.

Filling with water

The water reservoir can be filled at any
time.
ATTENTION
Damage to the device
Unsuitable water can block the nozzles
or damage the water level indicator.
Do not use condensation from the
clothes dryer for filling.
Do not use collected rain water for fill-
ing.
Do not use detergents or other addi-
tives (e.g. scents) for filling.
1. Fill the water reservoir with a maxi-
mum of 1 l of tap water.
max. 0.26 gal
(max. 1 L)

Switching the device on

ATTENTION
Device damage due to incorrectly
set water hardness
The decalcification cartridge only
works properly if the device is adjusted
to the local water hardness. The device
may calcify if the water hardness is set
incorrectly.
Adjust the device to the local water
hardness before operating it for the
first time, see chapter Setting the water
hardness.
English

Operation

11