Kärcher SC 3 EasyFix Mode D'emploi page 17

Masquer les pouces Voir aussi pour SC 3 EasyFix:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Attach floor cleaning cloth to floor
nozzle.
a Place the floor cleaning cloth with
the hook and loop fastener point-
ing upwards on the floor.
b Place the floor nozzle onto the
floor cleaning cloth, applying slight
pressure.
The floor cleaning cloth will stick to
the floor nozzle of its own accord
due to the hook and loop fastener.
Removing the floor cleaning cloth
1. Place one foot on the bottom corner
of the floor cleaning cloth and lift the
floor nozzle up.
Note
Initially, the floor cleaning cloth's
hook and loop fastener strip is very
strong and cannot be removed from
the floor nozzle easily. After the floor
cleaning cloth has been used sever-
al times and washed, it is easier to
remove from the floor nozzle and it
has reached the optimum adhesion.
Parking the floor nozzle
1. Hang the floor nozzle in the park
bracket during breaks in work.
English
17

Publicité

Table des Matières
loading

Table des Matières