Warranty; Safety Devices; Device Description; Installation - Kärcher SC 4 EasyFix Mode D'emploi

Warranty

The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Symbols on the appliance
(according to type of appliance)
Risk of burns, surface of appliance be-
comes hot during operation
Risk of scalding from steam
Read operating instructions
Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure regulator and the boiler thermo-
stat fail and the unit overheats, the safety thermostat
switches the unit off. Before resetting of the safety ther-
mostat, contact the responsible KÄRCHER Customer
Service.
Boiler thermostat
The boiler thermostat switches off the heating in the
event of a fault; for example, if there is no water in the
steam boiler and the temperature in the steam boiler ris-
es.
As soon as you refill the water, the device is ready for
use again.
Maintenance lock
The maintenance lock seals the steam boiler from the
steam pressure present. The maintenance cap is also a
pressure relief valve. If the pressure regulator is defec-
tive and the steam pressure in the steam boiler rises,
the pressure relief valve opens and steam is escapes
through the lock.
Prior to restarting the device, contact the responsible
KÄRCHER Customer Service.

Device description

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, please refer to the graphics page
Illustration A
Water reservoir
1
Filling hole, water reservoir
2
Switch - On
3
Switch - Off
4
Indicator light (green) - heating
5
Indicator light (red) - water shortage
6
Carrying handle
7
Holder for accessories
8
Holder for accessories
9
Maintenance lock
10
Storage for mains connection
11
Park bracket for floor nozzle
12
Mains connection cable with mains plug
13
Non-driven wheels (2 x)
14
Steering roller
15
Steam gun
16
Steam lever
17
Unlocking button
18
Selector switch for steam volume (with child lock)
19
Steam hose
20
Spotlight nozzle
21
Round brush (small)
22
**Power nozzle
23
**Round brush (large)
24
Manual nozzle
25
Manual nozzle microfibre cover
26
Extension tubes (2 x)
27
Unlocking button
28
Floor nozzle
29
Hook and eye connection
30
Microfibre floor cloth (1 x)
31
**Microfibre floor cloth (2 x)
32
**Carpet glider
33
** SC 4 EasyFix Premium
Installing accessories
1. Insert and engage the steering roller and non-driven
wheels.
Illustration B
2. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration I
3. Push the open end of the accessory onto the spot-
light nozzle.
Illustration J
4. Connect the extension tubes with the steam gun.
English

Installation

11