Festo SPC200-COM-DN2 Guide Rapide page 20

Pin
1
2
3
4
5
Caution
S Make sure the polarity is correct when you connect
the data cables and the cables for the power supply.
S Connect the screening/shield.
If the SPC200 is at the end of the field bus, a terminating
resistor (120 , 0.25 Watt) must be fitted between the
pins Data + (pin 4) and Data − (pin 2) of the field bus plug.
20
Description
0 V bus power supply (CAN_GND)
Data − (CAN_L)
Screening/shield (CAN_SHLD)
Data + (CAN_H)
+24 V DC bus power supply (CAN_V+)
Pin
1
2
3
4
5
Festo SPC200−COM−DN2 0602a English