Technical Data; Ec Declaration Of Conformity; Protecting The Environment - Black & Decker KS501 Mode D'emploi

ENGLISH
the saw forward until the front end of the shoe sits firmly on
the work surface and the blade clears the work through its
full stroke. Switch the tool on and allow it to attain maximum
speed. Grip the saw firmly and lower the back edge of tool
slowly until the blade reaches its complete depth. Hold the
shoe flat against the wood and begin cutting. Do not remove
blade from cut while it is still moving. Blade must come to a
complete stop.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner. Never let
any liquid get inside the tool and never immerse any part
of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste..
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
8
(Original instructions)

Technical data

Input voltage V
AC
Power input W
No-load speed Min
Max depth of cut
Wood mm
Steel mm
Aluminium mm
Weight kg
Level of sound pressure according to EN 62841:
) 89 dB(A), uncertainty (K) 5 dB(A)
Sound pressure (L
pA
Sound power (L ) 100 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Cutting chipboard (a ) 12.5 m/s , uncertainty (K) 1,5 m/s
2
h, B
Cutting sheet metal (a ) 12.6 m/s
h, M
%

EC declaration of conformity

MACHINERY DIRECTIVE
KS501, KS701E, KS701PE - Jig Saw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN62841-2-11:2016
These products also comply with directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
KS501 KS701E KS701PE
(Type 1) (Type 1) (Type 1)
230 230
400 520
3,000 0-3,000 0-3,000
-1
65 70
5 5
10 15
1.3 1.6
2
, uncertainty (K) 1,5 m/s
2 2
A. Smith
Technical Director
Berkshire, SL1 3YD
United Kingdom
22/01/2019
230
520
70
5
15
1.7