Victory Motorcycles Vegas 2010 Manuel D'utilisation page 89

Rear Wheel Alignment
8. When the wheel is aligned and drive belt tension is correct, tighten the adjuster lock nut (screw-style), then
tighten the axle nut.
Torque: 65 ft-lbs (88 Nm)
9. Recheck drive belt tension and alignment to be sure it is correct after tightening the axle.
10. If alignment is incorrect, repeat steps 4-8.
11. Pump the rear brake pedal several times to reset brake pad distance.
12. Carefully lower the motorcycle and safely support it on the sidestand.
Maintenance
87