Victory Motorcycles Vegas 2010 Manuel D'utilisation page 107

Maintenance
Brake Systems
Front Brake Fluid
Check the front brake fluid level. See page 51. The fluid level should be at or above the top of the sight glass. Add
fluid as needed. Replace cloudy or contaminated fluid.
Use DOT4 brake fluid in the brake fluid reservoir. Use fluid only from a sealed, clean container.
Do not operate the brake while the reservoir cover is removed. Fluid could overflow from the reservoir and cause air
to enter the fluid system.
WARNING! Using the wrong fluid or allowing air or contaminants into the fluid system can damage the system seals or result in a
malfunction that could lead to serious injury or death.
1. Straddle the motorcycle and bring it to the fully upright position. Position the handlebars so that the fluid reser-
voir is level.
2. Wipe the fluid container and the area around the reservoir cover with a clean cloth.
NOTICE: Brake fluid will damage painted surfaces and plastic parts. Always clean spilled brake fluid immediately with water and
a mild detergent.
3. Remove the reservoir cover and gasket.
4. Carefully add fluid to the recommended level.
5. Reinstall the reservoir gasket and cover.
105