Victory Motorcycles Vegas 2010 Manuel D'utilisation page 53

Front Brake Fluid Level
1. Straddle the motorcycle and bring it to the fully upright position.
Position the handlebars so that the fluid reservoir is level.
2. View the fluid level through the sight glass. The fluid should be
clear. Replace cloudy or contaminated fluid.
3. The fluid level should be at or above the top of the sight glass.
Add fluid as needed. See page 105.
Rear Brake Pedal
Press and release the rear brake pedal. It should move freely and
smoothly, and it should return to its rest position quickly when released.
You should feel a firm resistance in the pedal within the first 3/8 inch (8
mm) of pedal travel. If the brake pedal fails to perform as stated or travels
too far before beginning to engage the brake, see the VICTORY Service
Manual, or contact an authorized VICTORY dealer for service.
Pre-Ride Inspections
Minimum
Resistance
3/8 inch
(8 mm)
Level
at
51