Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Engine Break-in Period
Starting the Engine
The starter interlock system allows the engine to be started only when the transmission is in neutral, or when the
transmission is in gear with the clutch disengaged (clutch lever pulled in).
Tip: If the motorcycle runs out of fuel, prime the system before attempting to restart the engine. See page 61.
1. Perform the pre-ride inspections. See page 45.
2. Insert the key into the ignition switch and turn the switch to the ON position.
3. Straddle the motorcycle and bring it to the fully upright position.
4. Engage the front brake and place the sidestand in the stored (up) position.
5. If the neutral indicator is not illuminated, shift the transmission to neutral. See page 64.
6. Move the engine stop/run switch to the RUN position. You should hear the fuel pump run momentarily as it
pressurizes the fuel system.
62
Publicité
Chapitres
Table des Matières
