Victory Motorcycles Vegas 2010 Manuel D'utilisation page 102

Maintenance
Clutch (Mechanical)
Mechanical Clutch Lever Freeplay
1. Remove the right side cover.
2. Hold the clutch cable and loosen the adjuster lock nut.
3. While holding the cable, turn the cable adjuster inward or outward
until clutch lever freeplay is 0.5-1.5 mm.
4. While holding the cable, tighten the adjuster lock nut securely.
5. Reinstall the right side cover.
6. Verify that the safety switch activates properly. The engine should
not start in gear with the clutch lever released.
Tip: The starter interlock switch is dependent on the clutch lever freeplay
being set correctly to ensure activation of the clutch safety switch.
100
0.5-1.5 mm
Freeplay
Clutch
Cable
Lock Nut
Adjuster