Descaling The Machine; Descaling Procedure; Preparation - Philips 2100 Serie Mode D'emploi

English
22

Descaling the machine

Descaling procedure

4 Apply a thin layer of grease to the rails on both sides (see figure).
5 Insert the brew group as described in section 'Weekly cleaning of the
brew group'.
You can use the grease tube multiple times.
Scale builds up inside the machine during use. It is essential to descale the
machine when the orange descaling light lights up continuously. Only use
the special Philips Saeco descaling solution to descale the machine. The
Philips Saeco descaling solution is designed to ensure optimal performance
of the machine. You can buy the Philips Saeco descaling solution in the
online shop at www.shop.philips.com/service.
Note:The use of other descaling products may cause damage to the
machine and leave residues in the water.
Warning: Never drink the water with descaling mixture that you
pour into the water tank or any water with residues that comes
out of the machine during the descaling procedure.
Note: For more on-line support please visit our dedicated descaling page:
www.philips.com/descale.
The descaling procedure lasts approximately 30 minutes and consists of a
descaling cycle and a rinsing cycle.

Preparation

1 Switch off the machine.
Warning: If you do not switch off the machine, you cannot enter the
descaling
2 Empty the drip tray and place it back. Remove the automatic milk frother
(if present).
3 Empty the water tank and remove the Intenza+ water filter (if present).
Pour the entire bottle of the Philips/Saeco descaling solution into the
water tank.
4 Add water to the descaling solution in the water tank up to the MAX
indication.
5 Make sure the control dial is set to the coffee bean icon.
6 Place a bowl under the hot water/steam wand and coffee dispensing
spout.