Brewing 1 Or 2 Cups Of Espresso; Brewing Milk- Based Beverages; Brewing Cappuccino - Philips 2100 Serie Mode D'emploi

English
12

Brewing 1 or 2 cups of espresso

Brewing milk- based beverages

rinsing cycle, some of the water flows through the inner circuit directly into
the drip tray. Empty the drip tray regularly.
1 Make sure the on/off button light lights up continuously and the control
dial points to the desired coffee strength bean icon.
2 Place 1 or 2 cups under the coffee spout.
3 Select the coffee strength by turning the dial to one or two beans. Select
2 beans for a stronger taste.
4 Press the espresso button.
Note:You can interrupt the brewing cycle at any time. Press the same
button that you pressed to start brewing coffee.
-
Press the espresso button once to brew 1 cup of coffee.
-
Press the espresso button twice to brew 2 cups of coffee.
-
When brewing 2 cups of coffee the 2-cup light lights up. The machine
grinds the required amount of coffee beans for one cup and then fills
both cups half. Then the machine grinds coffee beans for one cup
again and fills both cups fully.
Note:When the machine is left in standby mode, it switches off
automatically after 60 minutes.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a
protein content of at least 3% to ensure an optimal frothing result. You can
use whole milk, semi-skimmed milk, soy milk and lactose free milk.

Brewing cappuccino

Warning: Danger of burning! Dispensing may be preceded by
small jets of hot water. When steam is used, the hot water/steam
wand and automatic milk frother could be hot. Only grab the
steam wand by its protective handle.
1 Attach the automatic milk frother to the hot water/steam wand.