HP LaserJet 9040mfp Guide De Mise En Route page 42

Manufacturer's Name:
Manufacturer's
Address:
declares, that the product
Product Name:
Model Numbers:
Product Options:
conforms to the following Product Specifications:
SAFETY:
EMC:
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive
73/23/EEC, and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions:
For Regulatory Topics only, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130,
Australia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015
(Phone: 208-396-6000)
40 Product Setup
Declaration of Conformity
Hewlett-Packard Company
Montemorelos 299
Guadalajara Jalisco, 45060 Mexico
Finishing accessories for HP LaserJet 9040MFP / 9050MFP printer
C8084A, C8085A, C8088A, C8088B, Q5693A, Q5710A
All
IEC 60950:1999 / EN60950:2000
CISPR 22:1997 / EN 55022:1998 - Class A
EN 61000-3-2:2000
EN 61000-3-3:1995 / A1
EN 55024:1998
FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 4
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
"Warning - This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures".
according to ISO/IEC Guide 22 and EN 45014
1
Guadalajara, Jalisco, Mexico
January 30, 2003
ENWW