Installing Macintosh Printing Software - HP LaserJet 9040mfp Guide De Mise En Route

Installing Macintosh printing software

This section describes how to install Macintosh printing software. The software is supported on
Macintosh OS 8 or later.
To install Macintosh printing software for Mac OS 8.6 to 9.2
1 Connect the network cable between the HP Jetdirect print server and a network port.
2 Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the
CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop,
and then double-click the Installer icon. This icon is located in the Installer/<language> folder
of the Starter CD-ROM (where <language> is your language preference). For example, the
Installer/English folder contains the Installer icon for the English printer software.
3 Follow the instructions on the computer screen.
4 Open the Apple Desktop Printer Utility located in the (Startup Disk): Applications: Utilities
folder.
5 Double-click Printer (AppleTalk).
6 Next to Apple Talk Printer Selection, click Change.
7 Select the MFP, click Auto Setup, and then click Create.
8 On the Printing menu, click Set Default Printer.
Note The icon on the desktop will appear to be generic. All the print panels will appear in the print
dialog in an application.
To install Macintosh printing software for Mac OS 10.1 and later
1 Connect the network cable between the HP Jetdirect print server and a network port.
2 Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the
CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop,
and then double-click the Installer icon. This icon is located in the Installer/<language> folder
of the Starter CD-ROM (where <language> is your language preference). For example, the
Installer/English folder contains the Installer icon for the English printer software.
3 Double-click the HP LaserJet Installers folder.
4 Follow the instructions on the computer screen.
5 Double-click the Installer icon for the desired language.
6 On your computer hard drive, double-click Applications, Utilities, and then Print Center.
7 Click Add Printer.
8 Select the AppleTalk connection type on OS X 10.1 and the Rendezvous connection type on
OS X 10.2.
9 Select the MFP name.
10 Click Add Printer.
11 Close the Print Center by clicking the close button on the upper-left corner.
Note Macintosh computers cannot be connected directly to the MFP by using a parallel port.
ENWW Install software 31