HP LaserJet 9040mfp Guide De Mise En Route page 11

1
This measurement is the space that is required to extend the multifunction finisher with the
attachment bar still attached to the latch under Tray 4. To remove the attachment bar from the latch,
the space that is required is 617.2 mm (24.3 inches).
2
This measurement is the space that is required for Tray 1 when it is fully extended for 11 x 17/A3-
size media.
3
This measurement is the space that is required when the attachment bar still attached to the latch
under Tray 4. To remove the attachment bar from the latch, the space that is required is 617.2 mm
(24.3 inches).
4
This measurement shows the depth of the product, including the edge of the control panel and the
standoffs from the Tray 4 casters.
5
This measurement is the space that is required to fully extend Tray 2 or Tray 3. The total combined
depth of the product and Tray 2 or Tray 3 when it is extended is 1130.3 mm (44.5 inches.)
HP LaserJet 9040mfp and 9050mfp dimensions with the optional multifunction finisher
and the ADF lid open (top and side views)
ENWW
1194 mm (47 in)
1
1308 mm (52 in)
503 mm
(20 in)
617 mm
691 mm
3
(24 in)
(27 in)
643 mm 457 mm
2
(25 in) (18 in)
457 mm
643 mm
(18 in)
(25 in)
Installation checklist 9