JVC KD-AR480 Manuel D'instructions page 26

Symptoms
• "OFF AIR" appears on the display while
listening to the XM Satellite radio.
• "LOADING" appears on the display while
listening to the XM Satellite radio.
• "RESET 8" appears on the display.
• Satellite radio does not work at all.
• The iPod or D. player does not turn on or does
not work.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on the display. • Check the connecting cable and its connection.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
• "NO FILES" or "NO TRACK" appears on the
display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both the unit and iPod/
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
26
Remedies/Causes
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
Reconnect this unit and the satellite radio correctly, then
reset the unit.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on the unit or the
iPod/D. player.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 18).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
No tracks are stored. Import tracks to the iPod or
D. player.
D. player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.