Publicité
6
Installing the rope
Connect the I'D S with a
locking carabiner.
Open the moving side plate.
Put the handle in position (C)
to open the cam. Insert the
rope as indicated by the
diagrams engraved on the
device. Close the swinging
side plate (safety catch) on
the locked carabiner.
WARNING: the moving
side plate must be properly
engaged on the cam axle and
on the carabiner.
6A. Device on the harness
6B. Device on an anchor
You must add friction by
redirecting the braking
side of the rope through a
carabiner.
Warning, the anti-error
catch can trap a rope that
is installed backwards, but
it does not eliminate all
possible errors.
7
Function test
Before each use, verify that the rope is
correctly installed and that the device is
working properly. You must always use a
backup safety system when performing
this test.
(*) WARNING DANGER OF DEATH,
do not allow anything to interfere
with the operation of the device or its
components (cam, catch, etc.). Any
constraint on the device nullifi es the
braking function.
WARNING, if your device doesn't work
anymore (rope slippage), retire it.
7A. Device on the harness
Pull on the anchored side of the rope: the
rope must jam in the device. If not, check
that the rope is correctly installed.
Gradually put your weight onto the
device, (rope taut, handle in position c).
With one hand holding the braking side
of the rope, gradually pull on the handle
with the other hand to allow the rope
to slide:
- Descent is possible = rope correctly
installed.
- Descent impossible = check the
installation of the rope (rope jammed by
the anti-error catch).
When the handle is released, the I'D
brakes, then jams the rope.
7B. Device on the anchor
Pull on the loaded side of the rope: the
rope must jam in the device. If not, check
that the rope is correctly installed.
Warning: if the rope is installed
backwards without being redirected
through a braking carabiner, the anti-
error catch will not work.
WARNING, if your device doesn't work
anymore (rope slippage), retire it.
3
I'D S D200S0/D200SN
6A.
7A.
D205001H (030610)
7B.
*
6B.
*
Publicité
