Setting The Proxy; Setting The Network Option - Denon AVR-4806 Mode D'emploi

System Setup
Gateway:
When connected to a gateway (router), input its IP address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If there are
two or more DNS addresses, input the first one at "Second DNS".
5
ENTER
Press .
1
2
3
4
• DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other network
settings are automatically set for the AVR-4806, computer,
broadband router and network devices.
• DNS (Domain Name System):
This is a system for converting the domain names used when
browsing Internet sites (for example, "www.denon.jp") into the IP
addresses actually used for communications (for example,
"202.221.192.106").

Setting the Proxy

Make this setting when connecting to the Internet via a proxy server.
1
D D H H
Press to select "Proxy" at the "Network Setup"
ENTER
screen, then press .
2
F F G G
Press to select "ON".
• The proxy server is enabled.
3 D D H H
Press to select the desired setting item, then
G G D D H H
press to input the character or number.
Proxy:
Input the proxy server domain name or address.
Port:
Input the proxy server port number.
4
ENTER
Press .
1
2
3
6
ENGLISH

Setting the Network Option

¢ Setting the Power Saving
When not using the AVR-4806 connected in a network, set "ON" to
reduce the power consumption when in the standby mode.
Set "OFF" when using the AVR-4806 connected in a network.
1 D D H H
Press to select "Network Option", then press
ENTER
.
2
F F G G
Press to select "OFF", then press
1
2
¢ Setting the PC Language
Select according to the language of the computer being used.
The languages are indicated with three letters conforming to ISO639-2.
1
D D H H
Press to select "PC Language", then press
to select the PC language.
2
ENTER
Press .
1
ENGLISH
System Setup
ENTER
.
F F G G